Opens in a new tab
Contipro logo

+420 465 543 793

info@contipro.com

4SPIN

4SPIN is a modular laboratory system for preparing nanofiber layers from both biopolymers and synthetic polymers. It enables precise control of process parameters, allows different emitters and collectors to be used, and makes it possible to prepare materials with different structures, orientations, and properties.

Learn more

From material research
to our own technology

Nanofibrous materials have broad potential in medicine, pharmaceuticals, cosmetics, tissue engineering and other specialised areas. However, their properties strongly depend on how they are prepared — from solution composition and process parameters to the collector type and final layer structure.

4SPIN connects experience with biopolymers, nanofibres and application development in a device designed for the preparation of advanced nanomaterials.

4SPIN

4SPIN is a benchtop laboratory system for the electrospinning of polymer solutions. It is designed for the development of new materials, process optimization, and the preparation of laboratory-scale and larger development samples. Its modular design allows different emitters and collectors to be combined according to the required productivity, spinnability, sample size, and resulting material structure.

The system’s central control unit enables key process parameters to be controlled and recorded, chamber conditions to be monitored, and previously validated procedures to be reproduced.

Variability

4SPIN enables work with a wide range of materials and process settings. This makes it possible to test different polymers, mixtures, structures and methods of nanofibre deposition.

Repeatability

Process control helps achieve homogeneous properties of prepared nanofibrous materials, even when samples are prepared repeatedly.

Performance

The device is designed to enable efficient preparation of nanofibrous layers and support the transition from initial experiments to larger development samples.

Controllability

Central control, clear operation and easy access to the chamber, emitters and collectors simplify the operator’s everyday work.

Safety

The device uses safety features for working with high voltage and is designed with a focus on reliable operation.

Support

We help partners navigate the device’s possibilities, choose suitable settings and consult the technological process.

Key features

3

technological processes

9

emitter types

7

collector types

2D and 3D

materials

Polymers

natural, synthetic
and blended

Structures

random, aligned,
composite, and core-shell

Technological possibilities

Electrospinning

Electrospinning is a method for preparing nanofibres from polymer solutions or melts. The result can be fibrous layers with different structures and orientations, depending on the process and collector type.

Electroblowing

Electroblowing combines electrospinning with airflow around the emitter. This method can improve process efficiency and expand the possibilities of spinning certain materials.

Electrospraying

Electrospraying enables the creation of fine particles or layers from biological, organic or inorganic materials. The principle is similar to electrospinning, but the result is particles or material deposition.

Processed materials

Materials processed and tested using the 4SPIN system.

Natural polymers

Hyaluronic acid, collagen, gelatin, chitosan, and cellulose.

Synthetic polymers

PLA, PCL, PVA, PEO, PU, PS, PGA, PLGA, and PAN.

Polymer blends

For example, HA/PEO, PEO/chitosan, PVA/cellulose, and PEG/HA.

Resulting structures

  • randomly arranged nanofibers,
  • aligned fibers,
  • composite layers,
  • core–shell fibers,
  • crossed and perpendicular layers,
  • hybrid structures,
  • large-area layers,
  • multilayer materials,
  • hollow tubes,
  • coatings,
  • nanofiber yarns.
4 SPIN Contipro

Selecting emitters and collectors for the desired material structure

The final properties of a nanofibrous material are influenced not only by the polymer used, but also by the emitter geometry, solution feeding method, electrode distance, voltage, collector speed, and conditions inside the deposition chamber. That is why 4SPIN is designed as a modular system with various types of emitters and collectors.

Emitters

Emitters determine how the polymer solution is fed and influence both productivity and the resulting fiber structure. 4SPIN offers single- and multi-needle, needleless, composite, and coaxial configurations.

Collectors

Collectors determine how the fibers are deposited and oriented. Static, rotating, tubular, belt, and disc collectors are available for producing various types of materials and structures.

Precise handling of aligned nanofibers

The special sliding tool is designed for C2 and C4 collectors. It enables precise movement between the conductive parts of the collector and controlled fiber deposition.

When rotated by 90°, it can be used to create layers with perpendicular fiber orientation. The tool also facilitates the handling of very thin nanofibrous materials.

From laboratory development to a production line

The diagrams illustrate possible electrospinning configurations at different scales – from laboratory validation of materials and process parameters to continuous production with multiple emitters and downstream web processing.

Laboratory configuration

The diagrams illustrate possible electrospinning configurations at different scales – from laboratory validation of materials and process parameters to continuous production with multiple emitters and downstream web processing.

Pilot-scale line

A simple setup with a single emitter system and laboratory collector is used to verify material electrospinnability, establish process parameters and prepare initial samples.

Production line

The production line uses multiple emitter modules, continuous web transport and downstream collection or processing steps. This configuration is intended for higher throughput and automated operation.

Possible application areas

Nanofibre
research

For teams developing new nanofibrous materials, testing spinning parameters or looking for suitable structures for further applications.

Biomedical
materials

For the development of scaffolds, wound healing materials, active substance carriers or other structures with potential in medicine and regenerative medicine.

Dermatology
and cosmetics

For the development of advanced topical materials, nanofibre masks, carrier systems or biopolymer-based application forms.

Technology
development

For partners looking for equipment and know-how for working with nanofibres, process parameters, emitters, collectors and the preparation of various structures.

Technical specifications

4SPIN can be configured for a specific material, process, and desired nanomaterial structure.

Key specifications

0–60 kV operating voltage

10–5,000 rpm collector speed

2 × 30 ml maximum solution volume

Process parameters
Parameter Value
Operating voltage 0–60 kV
Electric current 0–999 μA
Electrode distance 5–25 cm
Feed rate 0–9999 μl/min
Deposition time 0–1400 min
Airflow 3–99 l/min
Heated air temperature 30–80 °C
Collector speed 10–5,000 rpm
Design and operating conditions
Parameter Value
Maximum solution volume 2 × 30 ml
Device dimensions 98 × 66 × 110 cm
Working chamber dimensions Ø 61 × 66 cm
Weight 120 kg
Power supply 230 V / 50 Hz
Recommended relative humidity 20–40% RH

 

Technical specifications

Detailed information about 4SPIN technology

For technical parameters, an overview of emitters and collectors, application possibilities and device details, we recommend visiting the dedicated 4SPIN website.

There you will find detailed information about the device, electrospinning technology, processable materials and configuration options according to specific research and development needs.

Contact a specialistDownload the 4SPIN brochure