+420 465 543 793
4SPIN
4SPIN is a modular laboratory system for preparing nanofiber layers from both biopolymers and synthetic polymers. It enables precise control of process parameters, allows different emitters and collectors to be used, and makes it possible to prepare materials with different structures, orientations, and properties.
Nanofibrous materials have broad potential in medicine, pharmaceuticals, cosmetics, tissue engineering and other specialised areas. However, their properties strongly depend on how they are prepared — from solution composition and process parameters to the collector type and final layer structure.
4SPIN connects experience with biopolymers, nanofibres and application development in a device designed for the preparation of advanced nanomaterials.
4SPIN
4SPIN is a benchtop laboratory system for the electrospinning of polymer solutions. It is designed for the development of new materials, process optimization, and the preparation of laboratory-scale and larger development samples. Its modular design allows different emitters and collectors to be combined according to the required productivity, spinnability, sample size, and resulting material structure.
The system’s central control unit enables key process parameters to be controlled and recorded, chamber conditions to be monitored, and previously validated procedures to be reproduced.

Key features
Technological possibilities
Electrospinning
Electrospinning is a method for preparing nanofibres from polymer solutions or melts. The result can be fibrous layers with different structures and orientations, depending on the process and collector type.

Electroblowing
Electroblowing combines electrospinning with airflow around the emitter. This method can improve process efficiency and expand the possibilities of spinning certain materials.

Electrospraying
Electrospraying enables the creation of fine particles or layers from biological, organic or inorganic materials. The principle is similar to electrospinning, but the result is particles or material deposition.

Processed materials
Materials processed and tested using the 4SPIN system.
Natural polymers
Hyaluronic acid, collagen, gelatin, chitosan, and cellulose.
Synthetic polymers
PLA, PCL, PVA, PEO, PU, PS, PGA, PLGA, and PAN.
Polymer blends
For example, HA/PEO, PEO/chitosan, PVA/cellulose, and PEG/HA.
Resulting structures
- randomly arranged nanofibers,
- aligned fibers,
- composite layers,
- core–shell fibers,
- crossed and perpendicular layers,
- hybrid structures,
- large-area layers,
- multilayer materials,
- hollow tubes,
- coatings,
- nanofiber yarns.

Selecting emitters and collectors for the desired material structure
The final properties of a nanofibrous material are influenced not only by the polymer used, but also by the emitter geometry, solution feeding method, electrode distance, voltage, collector speed, and conditions inside the deposition chamber. That is why 4SPIN is designed as a modular system with various types of emitters and collectors.
Emitters
Emitters determine how the polymer solution is fed and influence both productivity and the resulting fiber structure. 4SPIN offers single- and multi-needle, needleless, composite, and coaxial configurations.
E1 Single Jet
initial experiments and difficult-to-spin materials
E2 Multi Jet
higher productivity while maintaining good spinnability
E3 Needleless Rod
needleless electrospinning and easy maintenance
E4 Multi Needleless
high productivity
E5 Linear Multi Needleless
homogeneous linear nanofiber layers
E6 Composite Double Jet
composite layers made from two materials
E7 Composite Needleless Rod
needleless composite layers
E8 Composite Multi Needleless
high-productivity composite materials
E9 Coaxial Single Jet
core–shell and hollow fibers
Collectors
Collectors determine how the fibers are deposited and oriented. Static, rotating, tubular, belt, and disc collectors are available for producing various types of materials and structures.
C1 Static Continual
randomly arranged structures and larger flat samples
C2 Static Patterned
aligned fibers
C3 Rotating Continual
larger samples and partial fiber alignment
C4 Rotating Patterned
precise fiber alignment
C5 Tube Collector
hollow tubes
C6 Endless Belt
larger nanofiber mats and transition to pilot-scale production
C7 Rotating Thin Disc
highly aligned samples and yarns
Precise handling of aligned nanofibers
The special sliding tool is designed for C2 and C4 collectors. It enables precise movement between the conductive parts of the collector and controlled fiber deposition.
When rotated by 90°, it can be used to create layers with perpendicular fiber orientation. The tool also facilitates the handling of very thin nanofibrous materials.
From laboratory development to a production line
The diagrams illustrate possible electrospinning configurations at different scales – from laboratory validation of materials and process parameters to continuous production with multiple emitters and downstream web processing.
Laboratory configuration
The diagrams illustrate possible electrospinning configurations at different scales – from laboratory validation of materials and process parameters to continuous production with multiple emitters and downstream web processing.

Pilot-scale line
A simple setup with a single emitter system and laboratory collector is used to verify material electrospinnability, establish process parameters and prepare initial samples.

Production line
The production line uses multiple emitter modules, continuous web transport and downstream collection or processing steps. This configuration is intended for higher throughput and automated operation.

Possible application areas
Technical specifications
4SPIN can be configured for a specific material, process, and desired nanomaterial structure.
Key specifications
0–60 kV operating voltage
10–5,000 rpm collector speed
2 × 30 ml maximum solution volume
Process parameters
| Parameter | Value |
|---|---|
| Operating voltage | 0–60 kV |
| Electric current | 0–999 μA |
| Electrode distance | 5–25 cm |
| Feed rate | 0–9999 μl/min |
| Deposition time | 0–1400 min |
| Airflow | 3–99 l/min |
| Heated air temperature | 30–80 °C |
| Collector speed | 10–5,000 rpm |
Design and operating conditions
| Parameter | Value |
|---|---|
| Maximum solution volume | 2 × 30 ml |
| Device dimensions | 98 × 66 × 110 cm |
| Working chamber dimensions | Ø 61 × 66 cm |
| Weight | 120 kg |
| Power supply | 230 V / 50 Hz |
| Recommended relative humidity | 20–40% RH |
Detailed information about 4SPIN technology
For technical parameters, an overview of emitters and collectors, application possibilities and device details, we recommend visiting the dedicated 4SPIN website.
There you will find detailed information about the device, electrospinning technology, processable materials and configuration options according to specific research and development needs.
